Air Conditioning & Ventilation · System
Industrial Ventilation Systems
Industrial ventilation is a balance problem: what is extracted has to be replaced. We design supply and extract as one system so that pressure inside the building stays controlled and airflow moves in the intended direction.
Systems range from general dilution ventilation across a factory floor to localised extraction at a specific process, including car park ventilation and plant room cooling.
Typical applications
- Production and assembly halls
- Process areas with heat or fume generation
- Car parks and basements
- Plant rooms, generator rooms and switch rooms
- Storage and packing areas
Engineered as a complete air path.
- 01
Air change assessment
Required air changes per hour are established from the process and occupancy.
- 02
Supply / extract balance
Extract and make-up air volumes are matched to control building pressure.
- 03
Fan selection
Fans are selected at the calculated duty point including system resistance.
- 04
Commissioning
Measured airflow is checked against design and adjusted.
- Controlled internal temperature and humidity
- Removal of fumes, odours and airborne contaminants
- Balanced pressure so doors and airflow behave predictably
- Better working conditions and equipment life
Related equipment
- Axial fans
- Centrifugal fans
- Cabinet acoustic fans
- GI ducting
- Louvres & grilles
Common questions.
- How many air changes does my facility need?
- It depends on the process, heat load and occupancy. We establish the figure during the site assessment rather than applying a generic number.
- Can ventilation be added without stopping production?
- In most cases installation can be phased or scheduled around shift patterns. This is agreed before work starts.
Related systems
HVACHVAC SystemsComplete heating, ventilation and air-conditioning systems designed, supplied and installed for industrial and commercial buildings.
VentilationHot Air ExtractionIndustrial hot air extraction paired with fresh air inflow ventilation to remove accumulated heat from roof spaces, process areas and equipment enclosures.
VentilationFresh Air Supply SystemsFiltered fresh air inflow and supply ventilation systems that replace extracted air, balance industrial airflow and maintain indoor air quality.
Start a project
Discuss your industrial ventilation systems project.
Tell us about your facility, project or engineering requirement.